One Segment Earns Ninety-Seven PercentWide moat

KLA (KLAC) — moat facet

Nine-tenths of KLA's revenue and ninety-seven percent of its segment profit come from one business, process control.

KLA is three businesses on paper and one in the profits. Under the segment measure it has used since fiscal 2025, Semiconductor Process Control earned $5,482.8 million of segment profit in fiscal 2026, Specialty Semiconductor Process $64.6 million and PCB and Component Inspection $108.0 million1. Process control was 96.9% of the total2.

Segment profit by segment, FY2026 ($M)Semiconductor Process Control 5,482.8 — 97%PCB and Component Inspection 108.0 — 2%Specialty Semiconductor Process 64.6 — 1%KLA Form 10-K FY2026, segment note (ASU 2023-07 segment profit)
Almost all of it from process control.

The margins explain it. Process control's segment profit was 44.8% of its revenue; the other two earned 11.1% and 14.4%3. Segment profit here is after research, selling and administrative costs and amortisation, so these are close to operating margins.

The concentration is the result of a purchase rather than a plan to diversify badly. The two smaller segments came with Orbotech, bought in February 2019 for approximately $3.26 billion4, and they are argued on Orbotech's Price below and on the revenue-line pages for each business.

What it means for an owner is that KLA's earnings power is the process control franchise and nothing else. The research budget follows the profit: of $1,532.1 million of research and development in fiscal 2026, the process control segment accounted for $1,341.3 million5.

Under the older segment measure, gross profit, the picture was the same. In fiscal 2024 the process control segment's gross profit was $5,629.3 million on revenue of $8,733.6 million, while the other two earned $282.9 million and $159.0 million6. Whichever measure is used, the process control segment is almost the whole company.

The smaller segments also spend heavily for what they earn. Specialty Semiconductor Process spent $59.4 million on research in fiscal 2026 and PCB and Component Inspection $130.2 million7, roughly a dollar of research for each dollar of their segment profit8. In process control, research of $1,341.3 million supported $5,482.8 million of profit9.

Focus is a strength when the franchise is strong. The share of segment profit that comes from process control is worth watching in both directions: below 90% would mean either that the smaller businesses had finally found a profit or that the core had weakened, and the segment note says which.

Moat trajectory: Holding steady

96.9% of segment profit in FY2026, after three loss years at PCB and Component Inspection.

The number that tests this moat
Moat Explorer calc
Process control share of segment profit, full year
96.9% (FY2026: $5,482.8M of $5,655.4M)

How much of the company is the franchise; below 90% would need the segment note to explain why.

How it's calculated: Semiconductor Process Control segment profit divided by total segment profit, KLA Form 10-K FY2026 segment note.
Source: Moat Explorer calculation from KLA filings ↗
⚠ Threats to the moat
⚠ THREAT 01
Everything Rides on One Business
Process control earns 97% of KLA's segment profit, so a bad year there has nothing to soften it.
References
  1. ReportedUnder the segment measure it has used since fiscal 2025, Semiconductor Process Control earned $5,482.8 million of segment profit in fiscal 2026, Specialty Semiconductor Process $64.6 million and PCB and Component Inspection $108.0 million.
    KLA Corporation Form 10-K for fiscal 2026 (year ended 30 June 2026) - segment note: segment revenue, costs of revenues, segment profit and impairments. — FY2026 · publ. 6 August 2026 · source ↗
  2. Moat Explorer calcProcess control was 96.9% of the total.
    Moat Explorer calculation from KLA's reported figures ($ millions unless stated; fiscal years end on 30 June; per-share figures adjusted for the ten-for-one split of June 2026). Revenue growth: FY2022 9,211.9 / 6,918.7 - 1 = +33.1%; FY2023 10,496.1 / 9,211.9 - 1 = +13.9%; FY2024 9,812.2 / 10,496.1 - 1 = -6.5%, the only decline FY2015-FY2026; FY2025 12,156.2 / 9,812.2 - 1 = +23.9%; FY2026 13,579.5 / 12,156.2 - 1 = +11.7%; FY2015-FY2026 13,579.5 / 2,814.0 = 4.8 times, 15.4% a year; FY2026 against FY2023 13,579.5 / 10,496.1 - 1 = +29%. Net income FY2024 2,761.9 / 3,387.3 - 1 = -18.5%, a fall of 625.4, of which the 289.5 impairment is 46%; net margin 4,830.8 / 13,579.5 = 35.6%; Other FY2023 381.1 / 259.4 - 1 = +46.9%; gross margin 1,598.8 / 2,814.0 = 56.8% (FY2015), 2,699.5 / 4,568.9 = 59.1% (FY2019); FY2026 4,830.8 / 4,061.6 - 1 = +18.9%; FY2015-FY2026 4,830.8 / 366.2 = 13.2 times; EPS 3.66 / 0.224 = 16.3 times. Operating income (no line reported): gross profit 8,324.4 - R&D 1,532.1 - SG&A 1,131.5 = 5,660.8 (FY2026), 5,660.8 / 13,579.5 = 41.7%; interest cover 5,660.8 / 284.4 = about 20 times. Segments FY2026: Semiconductor Process Control 12,244.7 / 13,579.5 = 90.2% of revenue; segment gross profit 12,244.7 - 4,453.6 = 7,791.1, 7,791.1 / 12,244.7 = 63.6%; segment profit 5,482.8 / 12,244.7 = 44.8%; 5,482.8 / 5,655.4 = 96.9% of segment profit; Specialty Semiconductor Process 64.6 / 584.1 = 11.1%, gross 278.8 / 584.1 = 47.7% (FY2021 206.7 / 369.2 = 56.0%); PCB and Component Inspection 108.0 / 750.4 = 14.4%, gross 385.3 / 750.4 = 51.3% (FY2024 159.0 / 552.5 = 28.8%); smaller segments 64.6 + 108.0 = 172.6; SSP segment gross margin FY2022 242.5 / 456.6 = 53.1%, FY2023 281.9 / 543.4 = 51.9%, FY2024 282.9 / 528.7 = 53.5%, FY2025 303.9 / 587.1 = 51.8%; Orbotech segments revenue less product categories 1,334.5 - (502.5 + 460.3) = 371.7; process control share of research 1,341.3 / 1,532.1 = 87.5%, almost nine-tenths; SG&A 1,131.5 / 13,579.5 = 8.3%; segment revenue 584.1 + 750.4 = 1,334.5. Process control segment research 1,341.3 / 12,244.7 = 11%; segment revenue growth 12,244.7 / 10,947.4 - 1 = +11.9%; SSP products 502.5 / 584.1 = 86% of segment revenue, research 59.4 / 584.1 = 10%; PCI Q4 241.1 / 750.4 = 32% of the year; process control lines FY2019 (1,630.9 + 1,161.3) / 4,568.9 = 61.1%; patterning within process control lines 2,791.1 / (4,336.7 + 2,791.1) = 39.2% (FY2023), 2,706.8 / (6,630.8 + 2,706.8) = 29.0% (FY2026); services share FY2019 1,176.7 / 4,568.9 = 25.8%; capital spending 375.9 / 45.8 = 8.2 times; peers 656.33 + 393.13 + 383.87 = 1,433.3, 1,433.3 / 245.24 = 5.8 times; FY2015 customers 15 + 12 + 11 = 38%. Process control segment gross margin FY2018 2,554.2 / 3,944.0 = 64.8%; FY2019 2,590.4 / 4,080.8 = 63.5%; FY2020 3,028.2 / 4,745.4 = 63.8%; FY2021 3,705.2 / 5,734.8 = 64.6%; FY2022 5,167.7 / 7,924.8 = 65.2%; FY2023 5,957.6 / 9,324.2 = 63.9%; FY2024 5,629.3 / 8,733.6 = 64.5%; FY2025 7,024.6 / 10,947.4 = 64.2%. Process control revenue FY2024 8,733.6 / 9,324.2 - 1 = -6.3%. Orbotech-related goodwill impairments 256.6 + 289.5 + 239.1 = 785.2. Research: 1,532.1 / 530.6 = 2.9 times; 530.6 / 2,814.0 = 18.9% (FY2015); 526.7 / 3,480.0 = 15.1% (FY2017); 711.0 / 4,568.9 = 15.6% (FY2019); 928.5 / 6,918.7 = 13.4% (FY2021); 1,296.7 / 10,496.1 = 12.4% (FY2023); 1,279.0 / 9,812.2 = 13.0% (FY2024); 1,532.1 / 13,579.5 = 11.3% (FY2026); FY2016 481.3 against 530.6 and FY2024 1,279.0 / 1,296.7 - 1 = -1.4%; research staff 27% x 17,000 = about 4,600. Product categories (FY2019-FY2026): wafer inspection 6,630.8 / 1,630.9 = 4.1 times, 22.2% a year; FY2025 6,198.8 / 4,333.3 - 1 = +43.1%; FY2026 6,630.8 / 6,198.8 - 1 = +7.0%; share 1,630.9 / 4,568.9 = 35.7% (FY2019), 6,198.8 / 12,156.2 = 51.0% (FY2025), 6,630.8 / 13,579.5 = 48.8% (FY2026). Patterning 2,706.8 / 1,161.3 = 2.3 times, 12.9% a year; FY2022 2,050.0 / 1,506.0 - 1 = +36.1%; FY2023 2,791.1 / 2,050.0 - 1 = +36.2%; FY2024 2,054.4 / 2,791.1 - 1 = -26.4%; FY2025 2,196.3 / 2,054.4 - 1 = +6.9%; FY2026 2,706.8 / 2,196.3 - 1 = +23.2%; share 2,791.1 / 10,496.1 = 26.6% (FY2023), 2,196.3 / 12,156.2 = 18.1% (FY2025), 2,706.8 / 13,579.5 = 19.9% (FY2026); process control lines 48.8 + 19.9 = 68.7%. SSP products 502.5 / 13,579.5 = 3.7%. PCI products 460.3 / 13,579.5 = 3.4%; FY2025 355.9 / 291.2 - 1 = +22.2%; FY2026 460.3 / 355.9 - 1 = +29.3%. Services 3,125.9 / 1,176.7 = 2.7 times, (3,125.9 / 1,176.7) ^ (1/7) - 1 = 15.0% a year; growth FY2020 +25.6%, FY2021 +13.6%, FY2022 +13.8%, FY2023 +10.8%, FY2024 2,329.6 / 2,117.0 - 1 = +10.0%, FY2025 +15.2%, FY2026 3,125.9 / 2,683.3 - 1 = +16.5%; FY2024 increase 2,329.6 - 2,117.0 = 212.6; share 2,117.0 / 10,496.1 = 20.2% (FY2023), 2,329.6 / 9,812.2 = 23.7% (FY2024), 3,125.9 / 13,579.5 = 23.0% (FY2026). Product revenue FY2023 10,496.1 - 2,117.0 = 8,379.1; FY2024 fall 8,379.1 - 7,482.7 = 896.4. A one-third fall in product revenue 10,453.5 / 3 = 3,484.5 against a year of 15% service growth 3,125.9 x 0.15 = 469, less than a seventh. Other 153.1 / 381.1 - 1 = -60%; 153.1 / 13,579.5 = 1.1%; FY2024 333.2 / 381.1 - 1 = -12.6%; FY2025 204.6 / 333.2 - 1 = -38.6%; FY2026 153.1 / 204.6 - 1 = -25.2%. Deferred system and service revenue 932.9 + 604.1 + 238.1 = 1,775.1, about $1.8 billion. Unrecognised contract price 1,775.1 / 3,125.9 x 12 = about 7 months of service revenue. Region: Taiwan FY2024 1,738.1 / 2,493.4 - 1 = -30.3%; FY2026 against FY2024 3,643.7 / 1,738.1 - 1 = +110%; FY2025 3,205.4 / 1,738.1 - 1 = +84.4%; FY2023 2,493.4 / 2,528.5 - 1 = -1.4%. Korea FY2019 584.1 / 1,178.6 - 1 = -50%; FY2024 906.9 / 1,895.7 - 1 = -52%; share 1,178.6 / 4,036.7 = 29.2% (FY2018), 584.1 / 4,568.9 = 12.8% (FY2019), 1,895.7 / 10,496.1 = 18.1% (FY2023), 906.9 / 9,812.2 = 9.2% (FY2024), 1,833.8 / 13,579.5 = 13.5% (FY2026). China FY2025 4,042.6 / 4,196.7 - 1 = -3.7%; FY2026 4,048.4 / 4,042.6 - 1 = +0.1%; China plus Taiwan 29.8% + 26.8% = 56.6%; Q4 FY2026 China 4,048.4 - 3,091.6 = 956.7, 956.7 / 3,657.6 = 26.2%. Backlog 12,570 / 7,860 - 1 = +59.9%; 12,570 / 13,579.5 = 93% of revenue; unrecognised contract price 1,775.1 / 12,570 = 14% of backlog. Advanced packaging about 1,000 / 13,579.5 = about 7% of revenue. Quarter: Q4 FY2026 revenue 3,657.6 / 3,174.7 - 1 = +15.2%; 3,657.6 / 3,415.1 - 1 = +7.1%; service 820.4 / 702.6 - 1 = +16.8%; process control 3,256.8 / 2,877.6 - 1 = +13.2%; PCB and Component Inspection 241.1 / 154.1 - 1 = +56.5%; GAAP gross margin (3,657.6 - 1,413.1) / 3,657.6 = 61.4%. Guidance midpoint 4,000 / 3,209.7 - 1 = +24.6%; 4,000 / 3,657.6 - 1 = +9.4%. Consensus fiscal 2027 18,110 / 13,579.5 - 1 = +33.4%; EPS 5.45 / 3.66 - 1 = +49%. The 2030 model at 13% a year: 13,579.5 x 1.13 ^ 2 = 17,340 (FY2028); 13,579.5 x 1.13 ^ 5 = about 25,000 (FY2031). Cash and capital: free cash flow 4,143.1 - 375.9 = 3,767.1; capital returns 2,289.8 + 1,057.8 = 3,347.6, 3,347.6 / 3,767.1 = 88.9%; dividends 1,057.8 / 4,830.8 = 21.9% of net income; buybacks 2,289.8 / 1,057.8 = 2.2 times dividends; capital spending 375.9 / 13,579.5 = 2.8% of revenue; operating cash flow 3,308.6 / 2,761.9 = 120% (FY2024), 4,081.9 / 4,061.6 = 100% (FY2025), 4,143.1 / 4,830.8 = 86% (FY2026); operating cash flow growth 4,143.1 / 4,081.9 - 1 = +1.5%; net income less operating cash flow 4,830.8 - 4,143.1 = 687.7; receivables 2,889.2 / 2,263.9 - 1 = +27.6%, an increase of 625.3; inventories 3,648.5 - 3,212.1 = 436.4; together 1,061.7. FY2015 dividends paid 3,041.1 / 366.2 = 8.3 times net income. Buybacks FY2015-FY2026 602.9 + 181.7 + 25.0 + 203.2 + 1,095.2 + 829.1 + 938.6 + 3,967.8 + 1,311.9 + 1,735.7 + 2,149.9 + 2,289.8 = 15,330.8; dividends paid 3,041.1 + 346.3 + 344.0 + 402.1 + 472.3 + 522.4 + 559.4 + 638.5 + 732.6 + 773.0 + 904.6 + 1,057.8 = 9,794.1. Diluted shares 1,319.6 / 1,637.0 - 1 = -19.4%. Net debt 5,887.4 - 1,649.8 - 3,252.6 = 985.0 (FY2026); 5,884.3 - 2,078.9 - 2,415.7 = 1,389.7 (FY2025); 6,630.1 - 1,977.1 - 2,526.9 = 2,126.1 (FY2024); 985.0 / 3,767.1 = 26% of free cash flow. Return on equity 4,830.8 / ((4,692.5 + 6,349.8) / 2 = 5,521.2) = 87.5%; FY2025 4,061.6 / ((3,368.3 + 4,692.5) / 2) = 100.8%; FY2024 2,761.9 / ((2,919.8 + 3,368.3) / 2) = 87.9%. Buyback authorisation 9,740 / 245,240 = 4%; 9,740 / (0.9 x 3,767.1) = 2.9 years; 9,740 / 571.0 = 17 quarters. Valuation: market value 245,240 / 383,870 = 0.64 (Applied Materials); 656,330 / 245,240 = 2.7 (ASML); 245,240 / 14,050 = 17.5 (Onto Innovation); 393,130 / 245,240 = 1.6 (Lam Research); 245,240 / 394,116 - 1 = -38% (June to September 2026); 394,116 / 118,454 = 3.3 times (June 2025 to June 2026); price 187.92 / 307.37 - 1 = -38.9%; 187.92 / 227.35 - 1 = -17% (June buyback price); 227.35 / 187.92 = 1.21 (21% more shares); free cash flow yield 3,767.1 / 245,240 = 1.5%; research 1,532.1 / 245,240 = 0.6% of KLA market value and 1,532.1 / 14,050 = 10.9%, about a ninth, of Onto Innovation's; revenue 13,579.5 / Lam Research 23,232.7 = 58%; market value 245,240 / 393,130 = 62%; buybacks 2,289.8 / 187.92 = 12.2 million shares at the September price, 12.2 / 1,319.6 = 0.9%; authorisation 9,740 / 2,289.8 = 4.3 years at the fiscal 2026 pace; P/E 245,240 / 4,830.8 = 50.8; P/S 245,240 / 13,579.5 = 18.1. Gross margin gap 61.3% less Lam Research about 50% = about 11 points - growth rates, margins, research and revenue by product category. — FY2015-FY2026 · publ. September 2026 · source ↗
    Method: Arithmetic on figures reported in KLA's Forms 10-K and 10-Q, quarterly results releases, XBRL filings and market data; operands shown in the source line.
  3. Moat Explorer calcProcess control's segment profit was 44.8% of its revenue; the other two earned 11.1% and 14.4%.
    Moat Explorer calculation from KLA's reported figures ($ millions unless stated; fiscal years end on 30 June; per-share figures adjusted for the ten-for-one split of June 2026). Revenue growth: FY2022 9,211.9 / 6,918.7 - 1 = +33.1%; FY2023 10,496.1 / 9,211.9 - 1 = +13.9%; FY2024 9,812.2 / 10,496.1 - 1 = -6.5%, the only decline FY2015-FY2026; FY2025 12,156.2 / 9,812.2 - 1 = +23.9%; FY2026 13,579.5 / 12,156.2 - 1 = +11.7%; FY2015-FY2026 13,579.5 / 2,814.0 = 4.8 times, 15.4% a year; FY2026 against FY2023 13,579.5 / 10,496.1 - 1 = +29%. Net income FY2024 2,761.9 / 3,387.3 - 1 = -18.5%, a fall of 625.4, of which the 289.5 impairment is 46%; net margin 4,830.8 / 13,579.5 = 35.6%; Other FY2023 381.1 / 259.4 - 1 = +46.9%; gross margin 1,598.8 / 2,814.0 = 56.8% (FY2015), 2,699.5 / 4,568.9 = 59.1% (FY2019); FY2026 4,830.8 / 4,061.6 - 1 = +18.9%; FY2015-FY2026 4,830.8 / 366.2 = 13.2 times; EPS 3.66 / 0.224 = 16.3 times. Operating income (no line reported): gross profit 8,324.4 - R&D 1,532.1 - SG&A 1,131.5 = 5,660.8 (FY2026), 5,660.8 / 13,579.5 = 41.7%; interest cover 5,660.8 / 284.4 = about 20 times. Segments FY2026: Semiconductor Process Control 12,244.7 / 13,579.5 = 90.2% of revenue; segment gross profit 12,244.7 - 4,453.6 = 7,791.1, 7,791.1 / 12,244.7 = 63.6%; segment profit 5,482.8 / 12,244.7 = 44.8%; 5,482.8 / 5,655.4 = 96.9% of segment profit; Specialty Semiconductor Process 64.6 / 584.1 = 11.1%, gross 278.8 / 584.1 = 47.7% (FY2021 206.7 / 369.2 = 56.0%); PCB and Component Inspection 108.0 / 750.4 = 14.4%, gross 385.3 / 750.4 = 51.3% (FY2024 159.0 / 552.5 = 28.8%); smaller segments 64.6 + 108.0 = 172.6; SSP segment gross margin FY2022 242.5 / 456.6 = 53.1%, FY2023 281.9 / 543.4 = 51.9%, FY2024 282.9 / 528.7 = 53.5%, FY2025 303.9 / 587.1 = 51.8%; Orbotech segments revenue less product categories 1,334.5 - (502.5 + 460.3) = 371.7; process control share of research 1,341.3 / 1,532.1 = 87.5%, almost nine-tenths; SG&A 1,131.5 / 13,579.5 = 8.3%; segment revenue 584.1 + 750.4 = 1,334.5. Process control segment research 1,341.3 / 12,244.7 = 11%; segment revenue growth 12,244.7 / 10,947.4 - 1 = +11.9%; SSP products 502.5 / 584.1 = 86% of segment revenue, research 59.4 / 584.1 = 10%; PCI Q4 241.1 / 750.4 = 32% of the year; process control lines FY2019 (1,630.9 + 1,161.3) / 4,568.9 = 61.1%; patterning within process control lines 2,791.1 / (4,336.7 + 2,791.1) = 39.2% (FY2023), 2,706.8 / (6,630.8 + 2,706.8) = 29.0% (FY2026); services share FY2019 1,176.7 / 4,568.9 = 25.8%; capital spending 375.9 / 45.8 = 8.2 times; peers 656.33 + 393.13 + 383.87 = 1,433.3, 1,433.3 / 245.24 = 5.8 times; FY2015 customers 15 + 12 + 11 = 38%. Process control segment gross margin FY2018 2,554.2 / 3,944.0 = 64.8%; FY2019 2,590.4 / 4,080.8 = 63.5%; FY2020 3,028.2 / 4,745.4 = 63.8%; FY2021 3,705.2 / 5,734.8 = 64.6%; FY2022 5,167.7 / 7,924.8 = 65.2%; FY2023 5,957.6 / 9,324.2 = 63.9%; FY2024 5,629.3 / 8,733.6 = 64.5%; FY2025 7,024.6 / 10,947.4 = 64.2%. Process control revenue FY2024 8,733.6 / 9,324.2 - 1 = -6.3%. Orbotech-related goodwill impairments 256.6 + 289.5 + 239.1 = 785.2. Research: 1,532.1 / 530.6 = 2.9 times; 530.6 / 2,814.0 = 18.9% (FY2015); 526.7 / 3,480.0 = 15.1% (FY2017); 711.0 / 4,568.9 = 15.6% (FY2019); 928.5 / 6,918.7 = 13.4% (FY2021); 1,296.7 / 10,496.1 = 12.4% (FY2023); 1,279.0 / 9,812.2 = 13.0% (FY2024); 1,532.1 / 13,579.5 = 11.3% (FY2026); FY2016 481.3 against 530.6 and FY2024 1,279.0 / 1,296.7 - 1 = -1.4%; research staff 27% x 17,000 = about 4,600. Product categories (FY2019-FY2026): wafer inspection 6,630.8 / 1,630.9 = 4.1 times, 22.2% a year; FY2025 6,198.8 / 4,333.3 - 1 = +43.1%; FY2026 6,630.8 / 6,198.8 - 1 = +7.0%; share 1,630.9 / 4,568.9 = 35.7% (FY2019), 6,198.8 / 12,156.2 = 51.0% (FY2025), 6,630.8 / 13,579.5 = 48.8% (FY2026). Patterning 2,706.8 / 1,161.3 = 2.3 times, 12.9% a year; FY2022 2,050.0 / 1,506.0 - 1 = +36.1%; FY2023 2,791.1 / 2,050.0 - 1 = +36.2%; FY2024 2,054.4 / 2,791.1 - 1 = -26.4%; FY2025 2,196.3 / 2,054.4 - 1 = +6.9%; FY2026 2,706.8 / 2,196.3 - 1 = +23.2%; share 2,791.1 / 10,496.1 = 26.6% (FY2023), 2,196.3 / 12,156.2 = 18.1% (FY2025), 2,706.8 / 13,579.5 = 19.9% (FY2026); process control lines 48.8 + 19.9 = 68.7%. SSP products 502.5 / 13,579.5 = 3.7%. PCI products 460.3 / 13,579.5 = 3.4%; FY2025 355.9 / 291.2 - 1 = +22.2%; FY2026 460.3 / 355.9 - 1 = +29.3%. Services 3,125.9 / 1,176.7 = 2.7 times, (3,125.9 / 1,176.7) ^ (1/7) - 1 = 15.0% a year; growth FY2020 +25.6%, FY2021 +13.6%, FY2022 +13.8%, FY2023 +10.8%, FY2024 2,329.6 / 2,117.0 - 1 = +10.0%, FY2025 +15.2%, FY2026 3,125.9 / 2,683.3 - 1 = +16.5%; FY2024 increase 2,329.6 - 2,117.0 = 212.6; share 2,117.0 / 10,496.1 = 20.2% (FY2023), 2,329.6 / 9,812.2 = 23.7% (FY2024), 3,125.9 / 13,579.5 = 23.0% (FY2026). Product revenue FY2023 10,496.1 - 2,117.0 = 8,379.1; FY2024 fall 8,379.1 - 7,482.7 = 896.4. A one-third fall in product revenue 10,453.5 / 3 = 3,484.5 against a year of 15% service growth 3,125.9 x 0.15 = 469, less than a seventh. Other 153.1 / 381.1 - 1 = -60%; 153.1 / 13,579.5 = 1.1%; FY2024 333.2 / 381.1 - 1 = -12.6%; FY2025 204.6 / 333.2 - 1 = -38.6%; FY2026 153.1 / 204.6 - 1 = -25.2%. Deferred system and service revenue 932.9 + 604.1 + 238.1 = 1,775.1, about $1.8 billion. Unrecognised contract price 1,775.1 / 3,125.9 x 12 = about 7 months of service revenue. Region: Taiwan FY2024 1,738.1 / 2,493.4 - 1 = -30.3%; FY2026 against FY2024 3,643.7 / 1,738.1 - 1 = +110%; FY2025 3,205.4 / 1,738.1 - 1 = +84.4%; FY2023 2,493.4 / 2,528.5 - 1 = -1.4%. Korea FY2019 584.1 / 1,178.6 - 1 = -50%; FY2024 906.9 / 1,895.7 - 1 = -52%; share 1,178.6 / 4,036.7 = 29.2% (FY2018), 584.1 / 4,568.9 = 12.8% (FY2019), 1,895.7 / 10,496.1 = 18.1% (FY2023), 906.9 / 9,812.2 = 9.2% (FY2024), 1,833.8 / 13,579.5 = 13.5% (FY2026). China FY2025 4,042.6 / 4,196.7 - 1 = -3.7%; FY2026 4,048.4 / 4,042.6 - 1 = +0.1%; China plus Taiwan 29.8% + 26.8% = 56.6%; Q4 FY2026 China 4,048.4 - 3,091.6 = 956.7, 956.7 / 3,657.6 = 26.2%. Backlog 12,570 / 7,860 - 1 = +59.9%; 12,570 / 13,579.5 = 93% of revenue; unrecognised contract price 1,775.1 / 12,570 = 14% of backlog. Advanced packaging about 1,000 / 13,579.5 = about 7% of revenue. Quarter: Q4 FY2026 revenue 3,657.6 / 3,174.7 - 1 = +15.2%; 3,657.6 / 3,415.1 - 1 = +7.1%; service 820.4 / 702.6 - 1 = +16.8%; process control 3,256.8 / 2,877.6 - 1 = +13.2%; PCB and Component Inspection 241.1 / 154.1 - 1 = +56.5%; GAAP gross margin (3,657.6 - 1,413.1) / 3,657.6 = 61.4%. Guidance midpoint 4,000 / 3,209.7 - 1 = +24.6%; 4,000 / 3,657.6 - 1 = +9.4%. Consensus fiscal 2027 18,110 / 13,579.5 - 1 = +33.4%; EPS 5.45 / 3.66 - 1 = +49%. The 2030 model at 13% a year: 13,579.5 x 1.13 ^ 2 = 17,340 (FY2028); 13,579.5 x 1.13 ^ 5 = about 25,000 (FY2031). Cash and capital: free cash flow 4,143.1 - 375.9 = 3,767.1; capital returns 2,289.8 + 1,057.8 = 3,347.6, 3,347.6 / 3,767.1 = 88.9%; dividends 1,057.8 / 4,830.8 = 21.9% of net income; buybacks 2,289.8 / 1,057.8 = 2.2 times dividends; capital spending 375.9 / 13,579.5 = 2.8% of revenue; operating cash flow 3,308.6 / 2,761.9 = 120% (FY2024), 4,081.9 / 4,061.6 = 100% (FY2025), 4,143.1 / 4,830.8 = 86% (FY2026); operating cash flow growth 4,143.1 / 4,081.9 - 1 = +1.5%; net income less operating cash flow 4,830.8 - 4,143.1 = 687.7; receivables 2,889.2 / 2,263.9 - 1 = +27.6%, an increase of 625.3; inventories 3,648.5 - 3,212.1 = 436.4; together 1,061.7. FY2015 dividends paid 3,041.1 / 366.2 = 8.3 times net income. Buybacks FY2015-FY2026 602.9 + 181.7 + 25.0 + 203.2 + 1,095.2 + 829.1 + 938.6 + 3,967.8 + 1,311.9 + 1,735.7 + 2,149.9 + 2,289.8 = 15,330.8; dividends paid 3,041.1 + 346.3 + 344.0 + 402.1 + 472.3 + 522.4 + 559.4 + 638.5 + 732.6 + 773.0 + 904.6 + 1,057.8 = 9,794.1. Diluted shares 1,319.6 / 1,637.0 - 1 = -19.4%. Net debt 5,887.4 - 1,649.8 - 3,252.6 = 985.0 (FY2026); 5,884.3 - 2,078.9 - 2,415.7 = 1,389.7 (FY2025); 6,630.1 - 1,977.1 - 2,526.9 = 2,126.1 (FY2024); 985.0 / 3,767.1 = 26% of free cash flow. Return on equity 4,830.8 / ((4,692.5 + 6,349.8) / 2 = 5,521.2) = 87.5%; FY2025 4,061.6 / ((3,368.3 + 4,692.5) / 2) = 100.8%; FY2024 2,761.9 / ((2,919.8 + 3,368.3) / 2) = 87.9%. Buyback authorisation 9,740 / 245,240 = 4%; 9,740 / (0.9 x 3,767.1) = 2.9 years; 9,740 / 571.0 = 17 quarters. Valuation: market value 245,240 / 383,870 = 0.64 (Applied Materials); 656,330 / 245,240 = 2.7 (ASML); 245,240 / 14,050 = 17.5 (Onto Innovation); 393,130 / 245,240 = 1.6 (Lam Research); 245,240 / 394,116 - 1 = -38% (June to September 2026); 394,116 / 118,454 = 3.3 times (June 2025 to June 2026); price 187.92 / 307.37 - 1 = -38.9%; 187.92 / 227.35 - 1 = -17% (June buyback price); 227.35 / 187.92 = 1.21 (21% more shares); free cash flow yield 3,767.1 / 245,240 = 1.5%; research 1,532.1 / 245,240 = 0.6% of KLA market value and 1,532.1 / 14,050 = 10.9%, about a ninth, of Onto Innovation's; revenue 13,579.5 / Lam Research 23,232.7 = 58%; market value 245,240 / 393,130 = 62%; buybacks 2,289.8 / 187.92 = 12.2 million shares at the September price, 12.2 / 1,319.6 = 0.9%; authorisation 9,740 / 2,289.8 = 4.3 years at the fiscal 2026 pace; P/E 245,240 / 4,830.8 = 50.8; P/S 245,240 / 13,579.5 = 18.1. Gross margin gap 61.3% less Lam Research about 50% = about 11 points - segments, regions, customers and backlog. — FY2015-FY2026 · publ. September 2026 · source ↗
    Method: Arithmetic on figures reported in KLA's Forms 10-K and 10-Q, quarterly results releases, XBRL filings and market data; operands shown in the source line.
  4. ReportedThe two smaller segments came with Orbotech, bought in February 2019 for approximately $3.26 billion, and they are argued on Orbotech's Price below and on the revenue-line pages for each business.
    KLA Corporation Form 10-K for fiscal 2019 - the acquisition of Orbotech completed on 20 February 2019, revenue by region for fiscal 2017-2019 and customer concentration. — FY2019 · publ. August 2019 · source ↗
  5. ReportedThe research budget follows the profit: of $1,532.1 million of research and development in fiscal 2026, the process control segment accounted for $1,341.3 million.
    KLA Corporation Form 10-K for fiscal 2026 (year ended 30 June 2026) - segment note: segment revenue, costs of revenues, segment profit and impairments. — FY2026 · publ. 6 August 2026 · source ↗
  6. ReportedIn fiscal 2024 the process control segment's gross profit was $5,629.3 million on revenue of $8,733.6 million, while the other two earned $282.9 million and $159.0 million.
    KLA Corporation Form 10-K for fiscal 2024 - segment gross profit for fiscal 2022-2024, revenue by region, TSMC as the only customer above 10% of revenue, and debt principal. — FY2024 · publ. August 2024 · source ↗
  7. ReportedSpecialty Semiconductor Process spent $59.4 million on research in fiscal 2026 and PCB and Component Inspection $130.2 million, roughly a dollar of research for each dollar of their segment profit.
    KLA Corporation Form 10-K for fiscal 2026 (year ended 30 June 2026) - segment note: segment revenue, costs of revenues, segment profit and impairments. — FY2026 · publ. 6 August 2026 · source ↗
  8. Moat Explorer calcSpecialty Semiconductor Process spent $59.4 million on research in fiscal 2026 and PCB and Component Inspection $130.2 million, roughly a dollar of research for each dollar of their segment profit.
    Moat Explorer calculation from KLA's reported figures ($ millions unless stated; fiscal years end on 30 June; per-share figures adjusted for the ten-for-one split of June 2026). Revenue growth: FY2022 9,211.9 / 6,918.7 - 1 = +33.1%; FY2023 10,496.1 / 9,211.9 - 1 = +13.9%; FY2024 9,812.2 / 10,496.1 - 1 = -6.5%, the only decline FY2015-FY2026; FY2025 12,156.2 / 9,812.2 - 1 = +23.9%; FY2026 13,579.5 / 12,156.2 - 1 = +11.7%; FY2015-FY2026 13,579.5 / 2,814.0 = 4.8 times, 15.4% a year; FY2026 against FY2023 13,579.5 / 10,496.1 - 1 = +29%. Net income FY2024 2,761.9 / 3,387.3 - 1 = -18.5%, a fall of 625.4, of which the 289.5 impairment is 46%; net margin 4,830.8 / 13,579.5 = 35.6%; Other FY2023 381.1 / 259.4 - 1 = +46.9%; gross margin 1,598.8 / 2,814.0 = 56.8% (FY2015), 2,699.5 / 4,568.9 = 59.1% (FY2019); FY2026 4,830.8 / 4,061.6 - 1 = +18.9%; FY2015-FY2026 4,830.8 / 366.2 = 13.2 times; EPS 3.66 / 0.224 = 16.3 times. Operating income (no line reported): gross profit 8,324.4 - R&D 1,532.1 - SG&A 1,131.5 = 5,660.8 (FY2026), 5,660.8 / 13,579.5 = 41.7%; interest cover 5,660.8 / 284.4 = about 20 times. Segments FY2026: Semiconductor Process Control 12,244.7 / 13,579.5 = 90.2% of revenue; segment gross profit 12,244.7 - 4,453.6 = 7,791.1, 7,791.1 / 12,244.7 = 63.6%; segment profit 5,482.8 / 12,244.7 = 44.8%; 5,482.8 / 5,655.4 = 96.9% of segment profit; Specialty Semiconductor Process 64.6 / 584.1 = 11.1%, gross 278.8 / 584.1 = 47.7% (FY2021 206.7 / 369.2 = 56.0%); PCB and Component Inspection 108.0 / 750.4 = 14.4%, gross 385.3 / 750.4 = 51.3% (FY2024 159.0 / 552.5 = 28.8%); smaller segments 64.6 + 108.0 = 172.6; SSP segment gross margin FY2022 242.5 / 456.6 = 53.1%, FY2023 281.9 / 543.4 = 51.9%, FY2024 282.9 / 528.7 = 53.5%, FY2025 303.9 / 587.1 = 51.8%; Orbotech segments revenue less product categories 1,334.5 - (502.5 + 460.3) = 371.7; process control share of research 1,341.3 / 1,532.1 = 87.5%, almost nine-tenths; SG&A 1,131.5 / 13,579.5 = 8.3%; segment revenue 584.1 + 750.4 = 1,334.5. Process control segment research 1,341.3 / 12,244.7 = 11%; segment revenue growth 12,244.7 / 10,947.4 - 1 = +11.9%; SSP products 502.5 / 584.1 = 86% of segment revenue, research 59.4 / 584.1 = 10%; PCI Q4 241.1 / 750.4 = 32% of the year; process control lines FY2019 (1,630.9 + 1,161.3) / 4,568.9 = 61.1%; patterning within process control lines 2,791.1 / (4,336.7 + 2,791.1) = 39.2% (FY2023), 2,706.8 / (6,630.8 + 2,706.8) = 29.0% (FY2026); services share FY2019 1,176.7 / 4,568.9 = 25.8%; capital spending 375.9 / 45.8 = 8.2 times; peers 656.33 + 393.13 + 383.87 = 1,433.3, 1,433.3 / 245.24 = 5.8 times; FY2015 customers 15 + 12 + 11 = 38%. Process control segment gross margin FY2018 2,554.2 / 3,944.0 = 64.8%; FY2019 2,590.4 / 4,080.8 = 63.5%; FY2020 3,028.2 / 4,745.4 = 63.8%; FY2021 3,705.2 / 5,734.8 = 64.6%; FY2022 5,167.7 / 7,924.8 = 65.2%; FY2023 5,957.6 / 9,324.2 = 63.9%; FY2024 5,629.3 / 8,733.6 = 64.5%; FY2025 7,024.6 / 10,947.4 = 64.2%. Process control revenue FY2024 8,733.6 / 9,324.2 - 1 = -6.3%. Orbotech-related goodwill impairments 256.6 + 289.5 + 239.1 = 785.2. Research: 1,532.1 / 530.6 = 2.9 times; 530.6 / 2,814.0 = 18.9% (FY2015); 526.7 / 3,480.0 = 15.1% (FY2017); 711.0 / 4,568.9 = 15.6% (FY2019); 928.5 / 6,918.7 = 13.4% (FY2021); 1,296.7 / 10,496.1 = 12.4% (FY2023); 1,279.0 / 9,812.2 = 13.0% (FY2024); 1,532.1 / 13,579.5 = 11.3% (FY2026); FY2016 481.3 against 530.6 and FY2024 1,279.0 / 1,296.7 - 1 = -1.4%; research staff 27% x 17,000 = about 4,600. Product categories (FY2019-FY2026): wafer inspection 6,630.8 / 1,630.9 = 4.1 times, 22.2% a year; FY2025 6,198.8 / 4,333.3 - 1 = +43.1%; FY2026 6,630.8 / 6,198.8 - 1 = +7.0%; share 1,630.9 / 4,568.9 = 35.7% (FY2019), 6,198.8 / 12,156.2 = 51.0% (FY2025), 6,630.8 / 13,579.5 = 48.8% (FY2026). Patterning 2,706.8 / 1,161.3 = 2.3 times, 12.9% a year; FY2022 2,050.0 / 1,506.0 - 1 = +36.1%; FY2023 2,791.1 / 2,050.0 - 1 = +36.2%; FY2024 2,054.4 / 2,791.1 - 1 = -26.4%; FY2025 2,196.3 / 2,054.4 - 1 = +6.9%; FY2026 2,706.8 / 2,196.3 - 1 = +23.2%; share 2,791.1 / 10,496.1 = 26.6% (FY2023), 2,196.3 / 12,156.2 = 18.1% (FY2025), 2,706.8 / 13,579.5 = 19.9% (FY2026); process control lines 48.8 + 19.9 = 68.7%. SSP products 502.5 / 13,579.5 = 3.7%. PCI products 460.3 / 13,579.5 = 3.4%; FY2025 355.9 / 291.2 - 1 = +22.2%; FY2026 460.3 / 355.9 - 1 = +29.3%. Services 3,125.9 / 1,176.7 = 2.7 times, (3,125.9 / 1,176.7) ^ (1/7) - 1 = 15.0% a year; growth FY2020 +25.6%, FY2021 +13.6%, FY2022 +13.8%, FY2023 +10.8%, FY2024 2,329.6 / 2,117.0 - 1 = +10.0%, FY2025 +15.2%, FY2026 3,125.9 / 2,683.3 - 1 = +16.5%; FY2024 increase 2,329.6 - 2,117.0 = 212.6; share 2,117.0 / 10,496.1 = 20.2% (FY2023), 2,329.6 / 9,812.2 = 23.7% (FY2024), 3,125.9 / 13,579.5 = 23.0% (FY2026). Product revenue FY2023 10,496.1 - 2,117.0 = 8,379.1; FY2024 fall 8,379.1 - 7,482.7 = 896.4. A one-third fall in product revenue 10,453.5 / 3 = 3,484.5 against a year of 15% service growth 3,125.9 x 0.15 = 469, less than a seventh. Other 153.1 / 381.1 - 1 = -60%; 153.1 / 13,579.5 = 1.1%; FY2024 333.2 / 381.1 - 1 = -12.6%; FY2025 204.6 / 333.2 - 1 = -38.6%; FY2026 153.1 / 204.6 - 1 = -25.2%. Deferred system and service revenue 932.9 + 604.1 + 238.1 = 1,775.1, about $1.8 billion. Unrecognised contract price 1,775.1 / 3,125.9 x 12 = about 7 months of service revenue. Region: Taiwan FY2024 1,738.1 / 2,493.4 - 1 = -30.3%; FY2026 against FY2024 3,643.7 / 1,738.1 - 1 = +110%; FY2025 3,205.4 / 1,738.1 - 1 = +84.4%; FY2023 2,493.4 / 2,528.5 - 1 = -1.4%. Korea FY2019 584.1 / 1,178.6 - 1 = -50%; FY2024 906.9 / 1,895.7 - 1 = -52%; share 1,178.6 / 4,036.7 = 29.2% (FY2018), 584.1 / 4,568.9 = 12.8% (FY2019), 1,895.7 / 10,496.1 = 18.1% (FY2023), 906.9 / 9,812.2 = 9.2% (FY2024), 1,833.8 / 13,579.5 = 13.5% (FY2026). China FY2025 4,042.6 / 4,196.7 - 1 = -3.7%; FY2026 4,048.4 / 4,042.6 - 1 = +0.1%; China plus Taiwan 29.8% + 26.8% = 56.6%; Q4 FY2026 China 4,048.4 - 3,091.6 = 956.7, 956.7 / 3,657.6 = 26.2%. Backlog 12,570 / 7,860 - 1 = +59.9%; 12,570 / 13,579.5 = 93% of revenue; unrecognised contract price 1,775.1 / 12,570 = 14% of backlog. Advanced packaging about 1,000 / 13,579.5 = about 7% of revenue. Quarter: Q4 FY2026 revenue 3,657.6 / 3,174.7 - 1 = +15.2%; 3,657.6 / 3,415.1 - 1 = +7.1%; service 820.4 / 702.6 - 1 = +16.8%; process control 3,256.8 / 2,877.6 - 1 = +13.2%; PCB and Component Inspection 241.1 / 154.1 - 1 = +56.5%; GAAP gross margin (3,657.6 - 1,413.1) / 3,657.6 = 61.4%. Guidance midpoint 4,000 / 3,209.7 - 1 = +24.6%; 4,000 / 3,657.6 - 1 = +9.4%. Consensus fiscal 2027 18,110 / 13,579.5 - 1 = +33.4%; EPS 5.45 / 3.66 - 1 = +49%. The 2030 model at 13% a year: 13,579.5 x 1.13 ^ 2 = 17,340 (FY2028); 13,579.5 x 1.13 ^ 5 = about 25,000 (FY2031). Cash and capital: free cash flow 4,143.1 - 375.9 = 3,767.1; capital returns 2,289.8 + 1,057.8 = 3,347.6, 3,347.6 / 3,767.1 = 88.9%; dividends 1,057.8 / 4,830.8 = 21.9% of net income; buybacks 2,289.8 / 1,057.8 = 2.2 times dividends; capital spending 375.9 / 13,579.5 = 2.8% of revenue; operating cash flow 3,308.6 / 2,761.9 = 120% (FY2024), 4,081.9 / 4,061.6 = 100% (FY2025), 4,143.1 / 4,830.8 = 86% (FY2026); operating cash flow growth 4,143.1 / 4,081.9 - 1 = +1.5%; net income less operating cash flow 4,830.8 - 4,143.1 = 687.7; receivables 2,889.2 / 2,263.9 - 1 = +27.6%, an increase of 625.3; inventories 3,648.5 - 3,212.1 = 436.4; together 1,061.7. FY2015 dividends paid 3,041.1 / 366.2 = 8.3 times net income. Buybacks FY2015-FY2026 602.9 + 181.7 + 25.0 + 203.2 + 1,095.2 + 829.1 + 938.6 + 3,967.8 + 1,311.9 + 1,735.7 + 2,149.9 + 2,289.8 = 15,330.8; dividends paid 3,041.1 + 346.3 + 344.0 + 402.1 + 472.3 + 522.4 + 559.4 + 638.5 + 732.6 + 773.0 + 904.6 + 1,057.8 = 9,794.1. Diluted shares 1,319.6 / 1,637.0 - 1 = -19.4%. Net debt 5,887.4 - 1,649.8 - 3,252.6 = 985.0 (FY2026); 5,884.3 - 2,078.9 - 2,415.7 = 1,389.7 (FY2025); 6,630.1 - 1,977.1 - 2,526.9 = 2,126.1 (FY2024); 985.0 / 3,767.1 = 26% of free cash flow. Return on equity 4,830.8 / ((4,692.5 + 6,349.8) / 2 = 5,521.2) = 87.5%; FY2025 4,061.6 / ((3,368.3 + 4,692.5) / 2) = 100.8%; FY2024 2,761.9 / ((2,919.8 + 3,368.3) / 2) = 87.9%. Buyback authorisation 9,740 / 245,240 = 4%; 9,740 / (0.9 x 3,767.1) = 2.9 years; 9,740 / 571.0 = 17 quarters. Valuation: market value 245,240 / 383,870 = 0.64 (Applied Materials); 656,330 / 245,240 = 2.7 (ASML); 245,240 / 14,050 = 17.5 (Onto Innovation); 393,130 / 245,240 = 1.6 (Lam Research); 245,240 / 394,116 - 1 = -38% (June to September 2026); 394,116 / 118,454 = 3.3 times (June 2025 to June 2026); price 187.92 / 307.37 - 1 = -38.9%; 187.92 / 227.35 - 1 = -17% (June buyback price); 227.35 / 187.92 = 1.21 (21% more shares); free cash flow yield 3,767.1 / 245,240 = 1.5%; research 1,532.1 / 245,240 = 0.6% of KLA market value and 1,532.1 / 14,050 = 10.9%, about a ninth, of Onto Innovation's; revenue 13,579.5 / Lam Research 23,232.7 = 58%; market value 245,240 / 393,130 = 62%; buybacks 2,289.8 / 187.92 = 12.2 million shares at the September price, 12.2 / 1,319.6 = 0.9%; authorisation 9,740 / 2,289.8 = 4.3 years at the fiscal 2026 pace; P/E 245,240 / 4,830.8 = 50.8; P/S 245,240 / 13,579.5 = 18.1. Gross margin gap 61.3% less Lam Research about 50% = about 11 points - segments, regions, customers and backlog. — FY2015-FY2026 · publ. September 2026 · source ↗
    Method: Arithmetic on figures reported in KLA's Forms 10-K and 10-Q, quarterly results releases, XBRL filings and market data; operands shown in the source line.
  9. ReportedIn process control, research of $1,341.3 million supported $5,482.8 million of profit.
    KLA Corporation Form 10-K for fiscal 2026 (year ended 30 June 2026) - Item 1 business: products, history, competitors, customers and employees. — FY2026 · publ. 6 August 2026 · source ↗
Sources
Generated September 28, 2026