The Shortage Taught Customers What Supply Is WorthNarrow moat

Texas Instruments (TXN) — moat facet

Owning the fabs meant owning the allocation decision, which in 2021 was the only thing industrial customers cared about.

The 2020-22 shortage taught industrial and automotive customers what a chip they cannot buy is worth, and TI was the supplier that could still ship.

End markets that pay for supply security (%)33%Industrial33%Automotive21%Personal electronics9%Data centre3%CommunicationsTwo-thirds of revenue from customers for whom a missing fifty-cent part stops a production line.
Owning the fabs meant owning the allocation decision, and these customers noticed.

Owning the fabs meant owning the allocation decision. When foundry capacity was rationed across the industry, a fabless supplier could not promise a customer anything its foundry had not promised it first. TI could, and its own framing since has been that internal manufacturing offers customers geopolitically dependable capacity.1

The customers who care most about this are the ones TI is most concentrated in. Industrial and automotive were 33% of revenue each in 2025, and both design a part in for a decade and cannot tolerate an interruption.2 An automotive customer that loses a fifty-cent part cannot build a car.

Holding inventory through the cycle is the other half of the same promise, and it is expensive — TI carries working capital for inventory as an explicit part of its capital allocation.3

The evidence that customers value it is indirect but consistent: TI's gross margin at the bottom of the last cycle was 57.0%, which is not what a company competing purely on price earns.4

Watch the industrial and automotive share of revenue. It is the part of the mix that pays for reliability.

Moat trajectory: Narrowing

The supply-security argument was forged in a shortage and is worth less every quarter that supply is adequate. The cost of providing it — $4.55bn of capital spending and inventory carried through the cycle — has not fallen.

The number that tests this moat
Moat Explorer calc
Analog revenue growth, first half
+24.4% in H1 2026 ($8,289M)

Customers that value supply buy more when TI has capacity; growth falling behind the market's would mean the lesson has worn off.

How it's calculated: 8,289 / 6,662.
Source: Texas Instruments Form 10-Q, quarter ended 30 June 2026 ↗
⚠ Threats to the moat
⚠ THREAT 01
Memories Are Short and Inventories Are Normal
Memories are short, inventories are normal, and the premium for certainty compresses while the cost of providing it does not.
References
  1. ReportedTI could, and its own framing since has been that internal manufacturing offers customers geopolitically dependable capacity.
    Texas Instruments Incorporated, Form 10-K for the year ended 31 December 2025 (SEC, CIK 97476) — Item 1, Business. TI's two reportable segments are Analog and Embedded Processing, with remaining activities in Other; operations began in 1930 and it has design, manufacturing or sales operations in more than 30 countries. The product portfolio includes more than 80,000 products. TI states four sustainable competitive advantages: a strong foundation of manufacturing and technology, a broad portfolio of analog and embedded processing products, the reach of its market channels, and the diversity and longevity of its products, markets and customer positions, which in combination it describes as difficult to replicate. An unpackaged chip built on a 300mm wafer costs about 40% less than one built on a 200mm wafer; TI continued qualifying and ramping production at its newest 300mm fabs in Richardson and Sherman, Texas, and Lehi, Utah, supporting external foundry transfers and internal transfers from its legacy 150mm facilities, and expects to maintain sufficient internal capacity to meet the majority of its production needs, offering customers geopolitically dependable capacity. TI sells to over 100,000 customers, with about half of revenue derived from customers outside its largest 50; more than 80% of revenue was direct in 2025, including TI.com. End markets as a percentage of 2025 revenue: industrial 33%, automotive 33%, personal electronics 21%, data centre 9%, communications equipment 3%, and calculators about 1%. About 60% of revenue comes from customers headquartered outside the United States; revenue from end customers headquartered in China represented about 20% of revenue in 2025, while revenue from products shipped into China represented about 50%. The analog and embedded processing markets remain highly fragmented, with significant global competition from dozens of large and small companies including emerging companies, particularly in Asia. The company's stated objective is the growth of free cash flow per share over the long term. — FY2025 · publ. 2026-02-06 · source ↗
  2. ReportedIndustrial and automotive were 33% of revenue each in 2025, and both design a part in for a decade and cannot tolerate an interruption.
    Texas Instruments Incorporated, Form 10-K for the year ended 31 December 2025 (SEC, CIK 97476) — Item 1, Business. TI's two reportable segments are Analog and Embedded Processing, with remaining activities in Other; operations began in 1930 and it has design, manufacturing or sales operations in more than 30 countries. The product portfolio includes more than 80,000 products. TI states four sustainable competitive advantages: a strong foundation of manufacturing and technology, a broad portfolio of analog and embedded processing products, the reach of its market channels, and the diversity and longevity of its products, markets and customer positions, which in combination it describes as difficult to replicate. An unpackaged chip built on a 300mm wafer costs about 40% less than one built on a 200mm wafer; TI continued qualifying and ramping production at its newest 300mm fabs in Richardson and Sherman, Texas, and Lehi, Utah, supporting external foundry transfers and internal transfers from its legacy 150mm facilities, and expects to maintain sufficient internal capacity to meet the majority of its production needs, offering customers geopolitically dependable capacity. TI sells to over 100,000 customers, with about half of revenue derived from customers outside its largest 50; more than 80% of revenue was direct in 2025, including TI.com. End markets as a percentage of 2025 revenue: industrial 33%, automotive 33%, personal electronics 21%, data centre 9%, communications equipment 3%, and calculators about 1%. About 60% of revenue comes from customers headquartered outside the United States; revenue from end customers headquartered in China represented about 20% of revenue in 2025, while revenue from products shipped into China represented about 50%. The analog and embedded processing markets remain highly fragmented, with significant global competition from dozens of large and small companies including emerging companies, particularly in Asia. The company's stated objective is the growth of free cash flow per share over the long term. — FY2025 · publ. 2026-02-06 · source ↗
  3. ReportedHolding inventory through the cycle is the other half of the same promise, and it is expensive — TI carries working capital for inventory as an explicit part of its capital allocation.
    Texas Instruments Incorporated, Form 10-K for the year ended 31 December 2025 (SEC, CIK 97476) — Item 1, Business. TI's two reportable segments are Analog and Embedded Processing, with remaining activities in Other; operations began in 1930 and it has design, manufacturing or sales operations in more than 30 countries. The product portfolio includes more than 80,000 products. TI states four sustainable competitive advantages: a strong foundation of manufacturing and technology, a broad portfolio of analog and embedded processing products, the reach of its market channels, and the diversity and longevity of its products, markets and customer positions, which in combination it describes as difficult to replicate. An unpackaged chip built on a 300mm wafer costs about 40% less than one built on a 200mm wafer; TI continued qualifying and ramping production at its newest 300mm fabs in Richardson and Sherman, Texas, and Lehi, Utah, supporting external foundry transfers and internal transfers from its legacy 150mm facilities, and expects to maintain sufficient internal capacity to meet the majority of its production needs, offering customers geopolitically dependable capacity. TI sells to over 100,000 customers, with about half of revenue derived from customers outside its largest 50; more than 80% of revenue was direct in 2025, including TI.com. End markets as a percentage of 2025 revenue: industrial 33%, automotive 33%, personal electronics 21%, data centre 9%, communications equipment 3%, and calculators about 1%. About 60% of revenue comes from customers headquartered outside the United States; revenue from end customers headquartered in China represented about 20% of revenue in 2025, while revenue from products shipped into China represented about 50%. The analog and embedded processing markets remain highly fragmented, with significant global competition from dozens of large and small companies including emerging companies, particularly in Asia. The company's stated objective is the growth of free cash flow per share over the long term. — FY2025 · publ. 2026-02-06 · source ↗
  4. ReportedThe evidence that customers value it is indirect but consistent: TI's gross margin at the bottom of the last cycle was 57.0%, which is not what a company competing purely on price earns.
    Texas Instruments Incorporated, Form 10-K for the year ended 31 December 2025 (SEC, CIK 97476) — Item 1, Business. TI's two reportable segments are Analog and Embedded Processing, with remaining activities in Other; operations began in 1930 and it has design, manufacturing or sales operations in more than 30 countries. The product portfolio includes more than 80,000 products. TI states four sustainable competitive advantages: a strong foundation of manufacturing and technology, a broad portfolio of analog and embedded processing products, the reach of its market channels, and the diversity and longevity of its products, markets and customer positions, which in combination it describes as difficult to replicate. An unpackaged chip built on a 300mm wafer costs about 40% less than one built on a 200mm wafer; TI continued qualifying and ramping production at its newest 300mm fabs in Richardson and Sherman, Texas, and Lehi, Utah, supporting external foundry transfers and internal transfers from its legacy 150mm facilities, and expects to maintain sufficient internal capacity to meet the majority of its production needs, offering customers geopolitically dependable capacity. TI sells to over 100,000 customers, with about half of revenue derived from customers outside its largest 50; more than 80% of revenue was direct in 2025, including TI.com. End markets as a percentage of 2025 revenue: industrial 33%, automotive 33%, personal electronics 21%, data centre 9%, communications equipment 3%, and calculators about 1%. About 60% of revenue comes from customers headquartered outside the United States; revenue from end customers headquartered in China represented about 20% of revenue in 2025, while revenue from products shipped into China represented about 50%. The analog and embedded processing markets remain highly fragmented, with significant global competition from dozens of large and small companies including emerging companies, particularly in Asia. The company's stated objective is the growth of free cash flow per share over the long term. — FY2025 · publ. 2026-02-06 · source ↗
Sources
Generated September 23, 2026